AC EV Charger Installation
AC EV CHARGER INSTALLATION ICON
Select the appropriate location - Before installing the plastic AC charging station, check whether the selected location meets the power, ground, and safety requirements. Typically, the installation location should be smooth, with low humidity and close to the power supply lines. At the same time, it is necessary to consider safety factors, such as whether the installation location will affect normal driving or be damaged by people.
Fix the bracket - Before installation, the bracket needs to be fixed to the ground, and ensure that the bracket is level with the ground.
Install the controller - Next, install the power controller on the bracket. The controller needs to be firmly fastened to the bracket and stable, ensuring that it works normally in high temperature, cold, and humidity environments.
ac ev charger station onto plate on the wall - ensure that the connection is stable and not affected by wind disturbance.
Install the charging gun holder - Installing the charging gun holder makes it more convenient for the user to fix the charging gun to Glad to be of service! Don't hesitate to let me know if you have any other questions or needs.
Connect the charging cable - Finally, it is necessary to connect the charging cable to the charging station and electric car. Ensure that the connection is correct, and the charging cable cannot rub, compress, or be squeezed by the ground. After the connection is made, test the normal operation of the charging station.
If any problems are encountered during the installation, it is recommended to seek assistance from professional personnel. Correct installation and maintenance can prolong the service life of the charging station and maintain its stable operation.
AC EV CHARGER STEPS FOR WIRING
If a power distribution box is used, the L, N, and PE ends of the input cable of the plug correspond to the L, N, and PE ends of the circuit breaker respectively.
If the connection connector (the figure is just a diagram, customers can choose the appropriate plug according to their needs), then the heat shrinkable waterproof connector is needed to connect the two ends, pay attention to L, N, PE corresponding connection, and use the crimping tool to squeeze the connection to ensure good contact.
AC EV CHARGER INSTALLATION STEPS
| Transport Package | |
| Dimension(W/H/D) | 350/300/173mm |
| G.W./N.W. | 3.3/4KG |
| Packing Quantity | 1in 1 carton |
In summary, the product integrates AC charging interface, human-computer interaction interface, electrical safety design and protection in one, with the electric car charger to provide Card swipe, mobile payment and other charging methods.installing plastic AC charging stations is simple, and they can be conveniently disassembled and moved according to actual needs.
